Build Explosive Pulling Power With the Pendlay Row

Share

Glenn Pendlay was one of the leading coaches in American weightlifting — he held a Level 5 accreditation from USA Weightlifting (the highest available) and coached many high-level athletes to medals in national and international competitions.

In addition to his lifters’ success on the platform, he’s known for popularizing a strength-building exercise known as the Pendlay row — a barbell row performed from the floor to the stomach each rep. The movement has been used to build back strength and size in strength athletes and lifters of all levels. Here’s how to perform this highly effective movement.

Pendlay Row Technique Video

Coach Greg Walsh demonstrates a textbook Pendlay Row. Note the nearly horizontal torso, stationary upper body, and full stop at the bottom.

[embedded content]

How to Do the Pendlay Row

The barbell row has been a long-running staple for building size and strength in the back, shoulders, and arms. The Pendlay row enforces specific technique to increase power output and make the target muscles work even harder.

Step 1 — Get Into the Starting Position

Muscular man in gym bending down to grab barbell
Credit: kittirat roekburi / Shutterstock

Begin with a loaded barbell on the floor directly above your toes. Stand with your feet slightly wider than shoulder-width. With a slight bend in your knees, push your hips back and bend at the waist until your upper body is parallel to the ground.

Arch your lower back and grab the bar with an overhand grip. Your grip width will be determined by your arm length. The priority is maintaining a parallel torso, so grabbing the bar wider than shoulder-width should be necessary.

Form Tip: You should feel tightness, not discomfort, in your hamstrings from holding the correct upper body position. If you feel pain, thoroughly warm-up your hips, hamstrings, glutes, and lower back to achieve the position more comfortably.

Step 2 — Perform an Explosive Pull

Man in gym performing barbell row
Credit: Breaking Muscle / Youtube

Flex your abs and squeeze the bar to create tension and stability. Pinch your shoulder blades together and quickly drive your elbows up while pulling the bar to your lower chest. Your torso should not lift from the parallel position.

The bar should physically touch your lower chest or upper abdomen before you allow it to return quickly to the ground. Don’t try to deliberately slow the barbell on the descent. Let the bar come to a complete rest on the ground before beginning the next rep.

Form Tip: If your torso moves significantly, reduce the weight on the bar and focus on maintaining a tight posture. Keeping a strict upper body position while lifting explosively is more important than swinging heavy weights.

Pendlay Row Mistakes to Avoid

The Pendlay row is specifically used to avoid technique issues more common with traditional barbell rows. Make sure you’re performing it correctly by avoiding these problems.

Moving Your Upper Body

One of the most noticeable differences with a Pendlay row is the significantly bent-over position, keeping the upper body parallel to the ground throughout the exercise. This allows maximum stress to be placed on the upper back and lat muscles, without using the lower back, glutes, and hamstrings to move the weight.

Muscular man performing barbell row exercise
Credit: Miljan Zivkovic / Shutterstock

If your torso shifts to get the weight moving, you’re dissipating stress from the target muscles and reducing the strength and size benefit of the exercise.

Avoid It: Remember that the body position is deliberately bent forward in order to get optimal results. Be conscious of maintaining a strict parallel position. Never trade technique for more weight on the bar.

Bouncing Off the Floor

Each rep of a Pendlay row should be performed with the bar starting from a rested position on the floor. This requires your body to produce maximum force for each individual rep, instead of relying on the stretch-shortening cycle (a muscular phenomenon which uses a stretched position to increase strength). (1) This technique is sometimes referred to as “dead-stop training.”

Man in gym performing barbell exercise
Credit: Qilin’s prance Filmmaker / Shutterstock

Eliminating this full rest at the bottom allows momentum to build, which decreases the body’s force production and reduces the exercise’s effectiveness.

Avoid it: Allow the bar to come to a complete stop on the ground after each rep. Releasing the bar and resetting your grip between each rep can also help to ensure a full stop. Approach any given set as a series of individual reps, not one group of several reps. For example, instead of “a set of five reps,” think of performing “five single reps” with one second between each.

Benefits of the Pendlay Row

The Pendlay row was initially used to support good old-fashioned strength gains. Like all barbell rows, it also delivers plenty of muscular growth as well. Here are all the reasons to train with this big, basic lift.

Muscular athletes holding barbell
Credit: Yupa Watchanakit / Shutterstock

Back Strength

A strong back is essential for maximal strength production during pressing exercises and for reducing the risk of shoulder injuries. (2) The Pendlay row directly trains all the muscles of the back to directly increase pulling strength, as well as to carryover to bench and overhead pressing.

Explosive Power

Because the Pendlay row is performed from a dead-stop, an explosive lift is required to move the weight. This helps to increase muscle recruitment and has been shown to increase overall power and strength gains. (3)

Back Size

Directly training the lats and upper back with heavy weights is an ideal way to trigger muscle growth. The Pendlay row applies muscular stress to these body parts, along with the biceps and forearms, making it an excellent cornerstone for any back-building workout.

Muscles Worked by Pendlay Row

The Pendlay row is a compound (multi-joint) exercise coordinating a number of muscles to complete the lift. This intense exercise hits nearly every muscle on the back half of the body, and then some.

black and white phot of bodybuilder preparing to lift a barbell from the ground
Credit: SOK Studio / Shutterstock

Upper Back

The upper back — consisting of the trapezius, rear deltoids (shoulders), rhomboids, and other smaller muscles — works primarily to control the shoulder blades (scapulae). The Pendlay row activates the upper back on each repetition, helping to lift the bar from the ground and pull the bar into the top position.

Lats

The latissimus dorsi (lats) are the largest muscles on the back, running near your ribs and from under your arms to your lower back. They work to bring your arm in towards your body from an extended position, making them the primary mover during any Who Should Do the Pendlay Row

Like many compound exercises, lifters with a variety of goals can benefit from incorporating the Pendlay row into their workouts.

Strength and Power Athletes

Lifters focused on moving serious weights in competition (or, really, for recreation too) can benefit from the strength and power built from Pendlay rows. Coach Pendlay initially used the exercise to assist the powerlifts and eventually used it as a staple for his Olympic weightlifting champions.

Training for Muscle

Heavy rowing exercises have consistently built large, muscular backs. The Pendlay row develops thicker, wider lats and an upper back to match.

How to Program the Pendlay Row

To efficiently train for size and strength without excessive fatigue in the support muscles of the lower back, which would compromise technique, the Pendlay row is best trained with relatively lower reps. Here are some effective guidelines

Moderate Weight, Low Repetition

Focusing on the Pendlay row’s explosive performance can sometimes mean applying more force to less weight. Training for two to six sets of two to four reps can prioritize maximum force production, which leads to more power development.

Heavy Weight, Low Repetition

Three to five sets of three to five reps is a time-tested way to move heavy weights on big compound lifts, delivering size and strength gains. When you begin lifting heavier weights while keeping strict form, you open a very big door to very big results. Remember that you may not be able to lift as much with the Pendlay row as you can with a traditional bent-over row.

Pendlay Row Variations

The Pendlay row delivers plenty of benefits, but not all lifters may be ready to dive into this big lift. Here are the best ways to work up to Pendlay rows.

Chest-Supported Row

The chest-supported row allows the back to be trained without requiring any lower body stabilization. This makes it ideal for lifters working around a lower back issue or lifters who may have mobility restrictions preventing them from reaching the parallel torso position needed for Pendlay rows.

[embedded content]

Another benefit of many chest-supported row machines is a variety of gripping handles, which can slightly alter recruitment by emphasizing different muscles of the back.

Neutral-Grip Two Dumbbell Row

While the single-arm dumbbell row is common, performing the movement with two dumbbells at once is an excellent “gateway” to barbell rowing. By requiring both sides of the body to carry their share of the load (no weightlifting pun intended), strength discrepancies in muscles on either side can be more easily noticed and addressed.

[embedded content]

Using a neutral-grip also reduces strain on the shoulder joint and allows increased muscular stress on the biceps and upper back.

Reverse-Grip Barbell Row

The reverse-grip barbell row involves a supinated (palms up) grip which significantly increases biceps activation and changes the exercise’s range of motion, which affects the back muscles.

[embedded content]

The trapezius is more significantly activated due to a more upright torso angle and the lats are kept under constant tension with a significant stretch in the bottom position.

Pendlay Row Alternatives

There are a handful of exercises which can build size, strength, and power like the Pendlay row. Here are some of the top choices.

Barbell Row

While the Pendlay row involves a strict, parallel torso position and pulling each repetition from the ground, “breaking” those rules turns the barbell row into a different back-building beast.

[embedded content]

The same muscle groups are activated to varying degrees. A slightly angled torso position reduces the hip and hamstring mobility requirement or Pendlay rows, while the muscles are kept under constant tension without resting the barbell. This makes the exercise more suitable for moderate to higher repetitions without fatiguing the supportive muscles.

Kroc Row

If a Pendlay row is considered a “strict barbell row,” a Kroc row could be considered a “controlled chaos dumbbell row.” It’s typically performed using heavy weights for high-rep sets and is often mistaken for standard single-arm rows being done with poor form.

[embedded content]

Kroc rows can be very effective for building upper back strength and size even though they involve leg drive and body English rather than super-strict upper body pulling.

Power Clean

The power clean is arguably one of the most beneficial exercises that an athlete can perform in the gym. (FAQs

My grip fatigues before the end of my set. Should I use lifting straps?

With many rowing exercises, and back exercises in general, muscular fatigue setting into the smaller muscles of your grip and forearms before the larger back muscles is a common issue. While grip strength often improves relatively quickly, it shouldn’t affect the primary goal of any exercise.

Supporting your grip with lifting straps during the heaviest and most challenging sets can improve performance overall. Over-relying on lifting straps, however, such as wearing them when lifting less-challenging weights, can prevent the development of grip strength.

Why does my lower back hurt during the exercise?

Keeping your torso in a parallel position is essential in the Pendlay row. However, some lifters may find that this position aggravates lower back pain or they may be unable to achieve sufficient depth in the first place.

The solution is to address flexibility and mobility in the lower back, hamstrings, glutes, and hips. Depending on your specific needs, it could be as simple as performing light weight